Top Navigation

Sale!
RJS CR2 Laser Replacement

RJS Replacement CR2 Laser Gun for D4000 or Laser Inspector 1000 Bar Code Verifiers

$1,045.00 $888.25

The RJS CR2 Laser Gun replacement requires either a D4000 bar code verifier display or a Laser Inspector bar code verifier display.

SKU: RJS-D4000-Laser-Scanner-CR2.

Product Description

The RJS CR2 Laser Gun replacement requires either a D4000 bar code verifier display or a Laser Inspector bar code verifier display.  When the CR2 is replaced the D4000 bar code verifier display or a Laser Inspector bar code verifier display MUST be sent in to Auto ID Solutions.  This is required because the two parts must be adjusted, calibrated, and re-certified as an entire system.  The service work is included in the cost of the CR2 Laser Gun and will be returned in a new box and with a three page Certificate of Calibration (which shows the NIST traceable standards used to certify the unit and the “As Left” values following calibration.  All service work is performed with 24 hours of arrival at our facility.  Please request a RMA number from: http://www.autoidsolutions.com/services/rma-request/

Additional Information

Product Type:

Bar Code Verifier Accessory

Brand:

RJS

Price:

$0 – $1999

Status:

New

Code Width:

Less than 1.0 in width, Less than 1.5 in width, Less than 2.5 in width, Less than 2.0 in width, Less than 3.0 in width, Less than 4.0 in width, Less than 4.5 in width, Less than 5.0 in width, Less than 6.0 in width, Greater than 7.5 in width

Code Height:

Less than 0.5 in tall, Less than 1.0 in tall, Less than 1.5 in tall, Less than 2.5 in tall, Greater than 2.5 in, Less than 2.0 in tall, Less than 0.25 in tall, Less than 0.125 in tall

Capt. Method:

Non-Contact

Calib. Plaque:

No

Re-certification:

Every 12 Months

Capture Area:

Single Scan Line

ISO/ANSI:

Partial

Wavelength:

660nm (Red)

Bar Code Type:

Linear 1D Bar Codes

Aperture Sizes:

Variable

Industry App:

AIAG, ANSI, CEN, GS1, HIBCC, ISO/IEC, MIL-STD-130M, TAPPI